Service mode: for repair shops, inspection firms and dealers

The app's Service tab is open to business accounts. It scans the car's modules, shows their settings and coding values, and clears faults.

Business 2dakika OBD-X1

9:41

ServiceSample data

Volkswagen Golf VII · 2015

Settings backed up · menu open until 21:35

SETTINGS

The vehicle's current settings were read during the scan; they are view-only for now.

Instrument cluster

Needle sweepon

Lap timeroff

Oil temperature displayon

Show compassoff

Passenger door module

Activation: lower mirror on reverseoff

Activation: synchronised mirror adjustmentoff

Step by step

1
Plug the device into the car, open the Service tab in the app and tap Start.
2
The car is identified and its modules are scanned.
3
The modules' current settings are saved to your account.
4
The service menu opens.

What's in the service menu

View module settings and coding values: VW, Audi, Seat and Skoda; Renault and Dacia; Peugeot and Citroën; the body module on Fiat.
Fault clearing: the modules are read again after the clear, so you see the result right away.
On BMW, service mode covers reading and clearing faults.
Which modules can be reached and which settings are shown depends on the car.

9:41

Clear fault codesSample data

Faults cleared in 1 module

Scan the vehicle again to see the result.

Check read

3 modules clean.

Engine ECU

Cleared

Unplug the device from the vehicle when you're not using it.

Scan again

Done

Settings are view-only

In service mode, module settings and coding values are shown, not changed. The only thing written to the car is a fault-code clear you confirm.

Who can use it

Business accounts: repair shops, inspection firms and dealers.
When you sign up, choose Business as the account type. To switch an existing account to Business, write to info@2dakika.com.
On an individual account, the Service tab shows "Service mode requires a business account".

Business

FAQ

Common questions

Service mode is a section for repair shops, inspection firms and dealers, open to business accounts: it scans the car's modules, shows their settings and coding values, clears faults and reads the modules again after the clear. Settings are only shown, never changed. When you sign up, choose Business as the account type; to switch an existing account to Business, write to info@2dakika.com.

Scanning is read-only, and every report states that nothing was written to the car during the scan. The only thing written to the car is a fault-code clear you confirm. In service mode, too, module settings are only shown, never changed.