2dakika OBD-X1 diagnostic device
The 2dakika OBD-X1 is a diagnostic device that plugs into your car's OBD port and connects to your phone over Bluetooth. With the 2dakika app it reads the car's electronic memory and turns it into a plain-language Vehicle Health Report.
$99+ $20 shipping
- 14-day returns
- 2-year warranty
Trucks, buses and Tesla are not supported. What can be read varies by car. Compatible cars
- Bluetooth LE
- No battery needed
- Tolerates 24 V
What it does
- Vehicle health reportReads fault codes and fault history, explained with over 50,000 descriptions.
- Mileage checkCompares the odometer with the mileage stored by the car's modules.
- DPF statusReads battery, EV/hybrid battery and DPF status on cars that report them.
- Module checkShows each module's part and software numbers and whether it belongs to this car.
- Clearing fault codesClears stored fault codes after a repair once you confirm; every clear is recorded.
- Live dataShows real-time values such as RPM, temperatures, pressures and battery voltage while the car runs.
- BusinessService modeWith a business account, views module settings and coding values and clears faults.
Get started in three steps
No setup, no batteries. The device is powered by the car.
- 1Plug inNo battery neededBluetooth
- 2Scan or watch liveReport: engine offLive: engine running
- 3Read, share, clearPDFLinkQR code
Specs
- Connection
- Bluetooth LE
- Vehicle bus
- K-line, CAN and CAN FD (the standard OBD line, plus the second diagnostic lines of Peugeot, Citroën, Ford, Fiat, Opel and Jeep)
- Voltage
- 12 V vehicles, tolerates 24 V
- Power
- Powered by the car, no battery
- Firmware
- Updates over the air through the app
- Phone
- iOS 15 or later, Android 7.0 or later
In the box
- 2dakika OBD-X1
- User guide
- Brochure
Questions about the device
It works with cars and light commercial vehicles that use K-line, CAN or CAN FD, which covers the vast majority of cars from 2004 on. Trucks, buses and Tesla aren't supported. What can be read varies by make and model; see the Compatible cars page for details.
No. The report is built on readings signed by the OBD-X1, so the app works only with the 2dakika OBD-X1.
Scanning is read-only, and every report states that nothing was written to the car during the scan. The only thing written to the car is a fault-code clear you confirm. In service mode, too, module settings are only shown, never changed.
At 2dakika.com or from the order screen in the app: $99 plus $20 shipping. You can return it within 14 days, and the device comes with a 2-year warranty.
iPhones and iPads on iOS 15 or later, and Android 7.0 or later phones with Bluetooth LE.
On most cars a scan takes under 2 minutes; the time depends on how many modules are read. Keep the ignition on and the engine off during the scan.